• Please Remember: Members are only permitted to share their own experiences. Members are not qualified to give medical advice. Additionally, everyone manages their health differently. Please be respectful of other people's opinions about their own diabetes management.
  • We seem to be having technical difficulties with new user accounts. If you are trying to register please check your Spam or Junk folder for your confirmation email. If you still haven't received a confirmation email, please reach out to our support inbox: support.forum@diabetes.org.uk

I have been using the Libre2plus

A

AnnS

Member
Relationship to Diabetes
Type 1
I have used the libre 2 plus for a couple of months but the slightest knock and it falls off I dont think the adhesive is as strong . I am going through my supply quickly Anyone else bad issues?
 
Not had one fall off, the other way in fact sticks like a limpet. Did have a dead one and one that failed after 10 days......
 
Like everything diabetes related, we all seem to be different.
Thankfully, I seem to have what I call "limpet skin" - everything sticks like a limpet to my skin. But I know many are not as "lucky".
There are a few things to consider:
- preparation - make sure your skin is dry and "oil-free". That means no moisturiser, including moisturising shower gel. Some people find wiping with alcohol wipe (or surgical spirit on a flannel/tissue) ensure their skin is completely oil free. And I know at least one member who dries their arm with a hairdryer to make sure there is not a drop of moisturiser there.
- placement - when judging where to put it, there are two things I consider - does that part of my arm flex? Initially, I lost a few sensors because it took me a while to realise that sensor to do not bend (unlike my arm) and they would start to peel off. The other thing to consider is which part of your arm is least susceptible to knocking (and lying on to avoid compression lows)
- awareness - once the sensor is in place, it takes some time (months in my case) to remember that it is there when putting clothes on (my bra was the arch-nemesis of sensors for a while), walking through doors, etc. Now it is second nature when dressing. Again, some members wear a reminder such as an elastic band over their sensor.

If you still have issues, there are a few option
- you can purchase over covers to provide additional protection to your sensor. Or use something like tegaderm plaster or Hypafix tape.
- you can purchse an arm band with a 3d printed "slot" for the sensor.

Finally, you should not be running low on your supply. You can report any sensor that falls off to Abbott and they will replace it. You can report issues on their website or by phone.
 
AnnS said:
I am going through my supply quickly Anyone else bad issues?
Click to expand...
It's felt the same as Libre 2 to me, and effective enough. (I've had a couple start to peel off on the last day which is a bit annoying.)

Obviously report any that come unstuck (they're not supposed to and I imagine it's possible that some sensors might have defects like less adhesive (I believe it's happened before)). Consider using some over patch or similar?
 
I always rub my arm with surgical spirit before applying the Libre 2+ and generally I have difficulty removing the sensor at the end of its life.
 
Usually I'd say my Libres stick well, but recentlly I've had two Libre 3+ drop off. This caused a huge problem recently as I use them with CamAps as a closed loop system. Last Friday my first Libre fell off then two failed to start. So I had none left and have been without all weekend causing enormous problems with my Ypsopump. I will say a heartfelt thanks to the telephone operative who expedited my replacements so they arrived this afternoon and not some time later this week!
 
I've not known them being as flaky as they are right now and I have been using them since they first came out!
 
Would seem to point to it. Maybe a supply chain issue due to the tarriff ****. Sensors often use rare earth materials which are subject to trade pressure or embargoes
 
For me, good skin prep and yes I am that person who washes/exfoliates, towel dries and then blasts with a hair drier for 20-30 seconds to ensure it is completely dry and then I apply my trusty arm band, which keeps it safe for the full 15 days. Recently my arm band broke after years of regular almost daily use and I didn't replace it straight away and had 2 come loose after about 10-13 days when I hadn't lost one in years. Bought a new arm strap and no problems again now, so I am pretty convinced my arm strap is very effective. It also acts as a visual reminder particularly when I am in the shower and having a good scrub or towel drying afterwards to be careful with that arm as it is so easy to forget which arm the sensor is on. I had a spa break recently and did quite a bit of swimming/sauna/jacuzzi and again by arm strap kept my sensor safe and secure. I wouldn't be without it.
 
I bought some adhesive breathable bandage to wrap round it and keep it in place.

I have to pay £55 for these every 15 days and need them to stay on !!
 
SimonV said:
I have to pay £55 for these every 15 days and need them to stay on !!
Click to expand...
If they fall off before the end of the 15 days, they are faulty. Abbott are good at replacing faulty sensors when you report them.
This can save you money. For example, if a sensor falls off aft er 10 days and you get a replacement, you will get 25 days for £55.
I am not suggesting you fraudulently report sensor faults that are not in order to save money.
 
You must log in or register to reply here.
Back
Top