DancingStar
Active Member
- Relationship to Diabetes
- Type 3c
If you dont have a Continuous Glucose Monitor and you rely on finger pricking to check your blood glucose, how many times per day do you routinely test?
I think Abbott had some research showing that scanning significantly more often than that was correlated with better results.For people with T1 the data suggests that checking 4-10(+) times is more cost effective than checking fewer tha. 4x a day (because of the impact of not being so aware of levels).
I think Abbott had some research showing that scanning significantly more often than that was correlated with better results.
I like the idea of an arm band for when I'm in bed, can you remember where you bought it from? I bought some of those fancy patterned sensor covers and they've been ok but they don't last for the life of the sensor and I dislodged a sensor trying to get the old cover off to put a new one on. I've bought some skin tac for when I get my new sensors.Fingers shouldn't be bruised, so perhaps you have the depth setting too high or you are squeezing and bruising them that way. I could certainly test 16 times a day for a whole week and not have sore fingers and many others here will also report similar. Good finger pricking technique is key and perhaps a good lancing device although I bought a FastClix and didn't personally find it any better than my regular one, but others here swear by AccuCheck FastClix.
As regards sensors coming off, good skin prep is really important and then personally I wear an arm band to support my sensors which consists of a 3 printed watch face surround which fits snuggly around the circumference of the sensor and an adjustable elastic strap to keep it in place. I think, particularly in this hot weather, sensors can benefit from a bit more support. The tossing and turning is likely due to the overnight warm temperatures too and without protection they can get dragged on bed linen. Placement of sensors is also a work in progress, finding a site where they are less likely to get caught on stuff and where the arm is "flat" enough for the sensor edges not to be vulnerable to lifting as muscles flex.